Overview of Barrel Heater Insulation with Aerogel Blanket
Barrel Heater Insulation with Aerogel Blanket is the pinnacle of high-performance insulation, 믿을 수 없을 만큼 얇고 가벼운 형태로 탁월한 내열성을 제공합니다.. 실리카 에어로겔과 섬유 강화재를 결합하여 설계됨, 공간과 효율성이 중요한 곳에 탁월한 열 보호 기능을 제공합니다..
Features of Barrel Heater Insulation with Aerogel Blanket
-
매우 낮은 열전도율: 시중에서 판매되는 재료 중 인치당 가장 높은 단열 값을 제공합니다..
-
얇고 공간 효율적: 최소한의 두께로 탁월한 성능 제공, 제한된 애플리케이션에서 공간 최대화.
-
소수성 및 내습성: 물을 밀어냅니다, 습한 환경에서 단열 성능과 재료 무결성 유지.
-
유연성과 내구성: 취급이 용이함, 자르다, 복잡한 형상 주위에 설치, 파이프, 및 장비.
-
내화성: 고온을 견딘다, 불연성이다, 전반적인 화재 안전을 향상시킵니다..
-
경량: 구조물에 최소한의 부하를 가하고 설치 물류를 단순화합니다..
Specification of Barrel Heater Insulation with Aerogel Blanket
Barrel Heating Unit Insulation with Aerogel Blanket– 기술 사양
제품 구조
The insulation makes use of a versatile aerogel blanket as its core material. This blanket is made from silica aerogel installed in a sturdy, high-temperature-resistant fiber matrix. The external layer is a strengthened light weight aluminum foil or stainless steel mesh, depending on the operating environment. All products meet industrial safety and security and thermal performance criteria.
열 성능
This insulation supplies outstanding heat retention. ~에 200 ℃(392 ° F), its thermal conductivity is as reduced as 0.018 W/m·K. 심지어 400 ℃(752 ° F), it remains below 0.025 W/m·K. These worths ensure marginal warm loss from barrel heating units utilized in extrusion, 조형, 또는 취급 장비. Individuals see lower energy use and more stable procedure temperature levels.
Density and Density
Requirement density alternatives consist of 6 mm, 10 mm, 그리고 15 mm. Personalized sizes are available upon demand. The blanket’s thickness varies from 180 에게 220 kg/m 5. Despite its lightweight nature, it maintains structural integrity under duplicated thermal cycling and mechanical handling.
Temperature level Resistance
The aerogel covering works continuously approximately 500 ℃(932 ° F). It does not break down, 줄이다, or release damaging fumes within this variety. Short-term direct exposure as much as 650 ℃ (1202 ° F) is likewise supported without permanent damage.
Setup and Fit
Each blanket is pre-cut to match conventional barrel heater diameters and lengths. It wraps conveniently around bent surfaces and secures with high-temp straps or adhesive tape. 특별한 도구가 필요하지 않습니다. The design allows fast removal for upkeep or assessment.
안전 및 규정 준수
The item has no asbestos or unsafe fibers. It adheres to RoHS, REACH, and ISO 1182 non-combustibility standards. Surface temperatures stay secure to touch throughout regular procedure, lowering burn threats for drivers.
Applications of Barrel Heater Insulation with Aerogel Blanket
Applications of Barrel Heating Unit Insulation with Aerogel Blanket
Why Utilize Aerogel Covering for Barrel Heaters?
Barrel heaters prevail in plastic handling, chemical manufacturing, and food manufacturing. These heating units maintain products at the appropriate temperature level throughout processing. 적절한 단열재가 없으면, a great deal of heat escapes. This leads to higher energy use and uneven home heating. Aerogel covering addresses this problem well.
Aerogel blanket is very thin but supplies strong thermal resistance. It lowers heat loss by as much as 50% compared to standard insulation. This merciless run a lot more efficiently and save power. The blanket likewise keeps surface temperature levels lower, which enhances security for workers nearby.
Where Is It Utilized?
In shot molding equipments, barrel heating units warm plastic resin before it’s formed. Covering these barrels with aerogel covering guarantees constant melt temperatures. That aids generate better-quality get rid of less defects.
In extrusion lines, stable barrel temperatures are key for smooth material flow. Aerogel insulation reduces locations and chilly zones along the barrel. This brings about more uniform output and much less waste.
Chemical activators and mixers also make use of heated barrels. 아래에, specific temperature level control matters a great deal. Aerogel coverings respond swiftly to temperature modifications and hold warm where it’s required. They function well even in tight spaces since they are versatile and simple to install.
Benefits You Can Depend On
The product handles high temperatures– 최대 650 ℃ (1200 ° F)– 다운을 손상시키지 않고. 습기에도 잘 견딥니다, 부식되지 않는다, and lasts a long period of time. 일부 단열재와는 다르게, it will not absorb water or lose efficiency with time.
Installation takes little time. The covering can be reduced with fundamental devices and fits comfortably around rounded surface areas. Maintenance is basic also– just wipe clean when needed.
Utilizing aerogel covering on barrel heaters improves effectiveness, cuts running prices, and supports much safer working conditions. It’s a wise upgrade for any process that relies on controlled warm.
회사 프로필
Graphne Aerogels는 신뢰받는 글로벌 화학 소재 공급업체입니다. & 12년 이상의 초고품질 에어로젤 및 그래핀 제품 공급 경험을 보유한 제조업체.
회사에는 전문 기술 부서와 품질 감독 부서가 있습니다., 시설이 잘 갖춰진 실험실, 첨단 테스트 장비와 애프터 서비스 센터를 갖추고 있습니다..
고품질 그래핀을 찾고 있다면, 에어로젤 및 관련 제품, 언제든지 저희에게 연락하시거나 필요한 제품을 클릭하여 문의사항을 보내주세요..
결제 방법
신용장, 티/티, 웨스턴 유니온, 페이팔, 신용카드 등.
선적
그것은 바다로 발송될 수 있었습니다, 비행기로, 또는 상환 영수증이 나오는 대로 최대한 빨리 공개하십시오..
5 FAQs of Barrel Heater Insulation with Aerogel Blanket
Barrel Heater Insulation with Aerogel Blanket – Top 5 자주 묻는 질문
에어로젤 담요 란 무엇입니까??
에어로겔 담요는 실리카 에어로겔로 만든 경량 단열재입니다.. 열전도율이 매우 낮습니다.. This means it stops heat from escaping better than most traditional insulators. The blanket is flexible and easy to wrap around barrel heaters.
Why use aerogel for barrel heater insulation?
Barrel heaters lose a lot of heat without proper insulation. Aerogel blankets reduce that heat loss. They keep the barrel at a stable temperature. This saves energy and cuts operating costs. Aerogel also works well in tight spaces where other insulation won’t fit.
에어로젤은 취급해도 안전한가요??
예, modern aerogel blankets are safe when used as directed. 오래된 단열재처럼 유해한 섬유가 포함되어 있지 않습니다.. 아직, 설치 시 장갑과 보안경을 착용하십시오.. Avoid breathing any dust if you cut the material.
에어로젤 단열재는 얼마나 오래 지속됩니까??
Aerogel blankets last many years if installed correctly. 그들은 습기에 저항합니다, 진동, 그리고 높은 온도. These blankets do not settle or compress over time. That means their performance stays strong throughout their service life.
직접 설치할 수 있나요??
Most users can install aerogel blankets without special tools. Just measure the barrel, cut the blanket to size, and wrap it snugly. Use high-temperature tape or straps to hold it in place. 틈이 없는지 확인하세요.. A tight fit gives the best results.
